|Total possibilities||100%||20%||You get 80% more with the commercial license!|
|Works with linked files||–||Create openings for linked MEP in architectural / structural file or|
|Teamwork/collaboration between MEP, architectural & structural engineers||–||Share opening geometry and data with architects/structural engineers|
using .xml file.
|Openings for IFC MEP elements||–||Create openings for current or linked MEP elements from IFC files.|
|Conduits||Make openings for structural elements, such as Walls,|
Floors, Roofs, Ceilings, Slabs, Beams, Columns, and MEP elements, like Pipes,
Ducts, Cable Trays, and Conduits.
|Predefined configurations for:|
|–||Set configurations for opening size and cut offset from MEP object, define|
distance between two openings to be merged into one, define opening shape,
and allow partial interference.
|Configuration classification by:|
|Pipe: Fire protection|
|MEP Object Size|
|–||Configure opening size, cut offset, joining distance, etc. by MEP|
element’s category and system classification.
|Configuration sharing||–||Share predefined configurations with colleagues.|
|Calculate opening elevation from:|
|Project zero point|
|Global zero point|
|–||Calculate opening elevation in accordance with host level, project zero|
point, or global zero point.
|Opening elevation positions|
|–||Calculate opening distance to the bottom, top, or center point of|
|Openings update if:|
|MEP changed position|
|New opening inserted|
|MEP size changed|
|–||Update openings if MEP elements are deleted, moved, resized, or any other|
action has been carried out on them.
|Move opening||Possible to modify openings manually.|
|Minimum opening size||–||Set minimum MEP service size limit to insert openings.|
|Join selected openings||–||Join selected openings into one bigger opening.|
|Partial interference openings||–||Possibility to add openings when MEP is partially clashing with|
|Wall partial interference||Floor partial interference|
|Structural openings for doors & windows||–||Auto-insert openings for windows and doors in|
linked Structural model.
|Fire dampers||–||Add fire dampers where needed.|
|Fire collars||–||Add fire collars where needed.|
|Rectangular solid||Distribute void families that cut structures in Revit models. Change voids to solid elements to|
export openings to Navisworks or IFC.
|Extra parameters for documentation|
|Opening mark (passing through system mark)|
|Additional top cut offset|
|Additional bottom cut offset|
|–||Use host and MEP service parameters for tagging,|
|–||See when, how, and who inserted openings. Approve|
or decline openings with comments.