Designing with Precast & Prestressed Concrete Using Revit Can Be Easy [Webinar]

Attention! Webinar has ended but its recording is now available!
If you want to watch the recorded version of the webinar please contact us by email and we’ll send you a record link.

On the 1st of October, we’ll give you some valuable information about precast concrete design that is topical for architects, engineers, and others on the construction team.

Structural precast concrete elements must comply with architectural ideas of modern buildings, and their technological capabilities give designers more versatility to face a wide variety of design challenges. But engineering process, like modeling of precast elements, is often confusing and time-consuming, therefore efficiency in design (as well as production, delivery, erection, etc.) is very relevant to architects, structural engineers and others in building industry.

Please join us in a free 60 min. webinar on the best ways to model and prepare documentation of precast/prestressed concrete elements with the help of Revit® extensions.

Date: 1 Oct 2015

Venue: Online


How to Model Precast Elements and Complete Documentation Much Faster in Revit®

Join the webinar and see how to:

  • Quickly insert connections (conventional reinforcing bars, strands with high tensile strength, or a combination of both) into your precast project (with Insert elements)
  • Easily create hollow-core slabs for flooring/ceiling units (with Smart Floor)
  • Renumber your precast elements by defined rules in a few clicks (with Sort Mark)
  • Prepare finished shop drawings of your designed precast elements automatically (with Smart Assemblies)

Also, you’Il be able to see an introduction of our new product Smart Details. This upcoming BIM solution for Revit will help structural engineers insert and manage different intelligent details like structural plates, anchors, grout tubes, etc. Smart Details will insert structural connections into predefined positions of Revit model elements by using built-in and fully customizable rules.

Intended Audience: All Revit Architecture / Structure Users

This session is ideal for structural designers who want to learn how to easily make reinforced concrete assemblies and quickly create shop drawings. During this live session you can see how to model reinforced concrete structures faster and more precisely.


Webinar presenter:


Smart Assemblies

Smart Details (in the development)

Our tools for Revit are designed to help designers facilitate work with Revit; therefore AGACAD applications help to make BIM project quite simple if not easy. So please join and see live how our tools can simplify designing concrete structures.


Valensas Balsevicius
BIM Application Engineer

Structural Engineer
Certified Autodesk Revit Structure Professional

Webinar speaker will explain how to accelerate modeling of concrete structures and documentation process.

Reserve your Webinar seat and bring all of your questions to this live session.


Thu, Oct 1, 2015

10:00 AM – 11:00 AM CDT (GMT-05)



Thu, 1 Oct, 2015

5:00 PM – 6:00 PM EST (GMT+10)



Thu, 1 Oct, 2015

There will be two sessions held –
please choose the time that suits you best.

9:00 AM – 10:00 AM CET (GMT+02)

4:00 PM – 5:00 PM BST (GMT, UK time)

Don’t forget to check your local time!

Shortly about the webinar:

We organize online events using GotoWebinar Online Webinars program. During the webinar we will show our software possibilities on your monitor and you will be able to ask questions via internet writing, using the microphone or call by using your telephone.

After the registration you’ll get a confirmation email with the link to join the webinar. At the time of event, click this link to join the event. After GotoWebinar software installation (it’s free for you and it takes only few minutes) you’ll see a view of our display.

Please make sure you have your computer / laptop speakers turned on during the webinar as audio will be shared via your speakers. You can also call us.

If you have any questions or comments, please contact us by email

Never miss important updates

Related blog posts

All posts

How to use SIP Panels solution to automate framing in Revit

We are thrilled to announce an exciting upgrade to our Be.

Read more

Smart Documentation add-in for Revit: new UI, advanced/basic mode, sample configurations, and more

Our Smart Documentation add-in for Autodesk® Revit® has just received a new update! We’re continuin...

Read more

How to use Post & Beam Framing plug-in to automate heavy timber frames in Revit

We recently released a major UI enhancement of our Be.

Read more
Copyright © 2013-2024 AGA CAD, UAB. All rights reserved | Privacy policy